Eye care professionals conduct tests to measure the fluid pressure called intraocular pressure inside the eye. Patients who are at risk of glaucoma have to undergo this test. Glaucoma is a disease that causes blindness. It affects the optic nerve of the eye, causing damage to it. This damage is done by fluid that builds ups in the eye. Tonometer is a device that is used to measure intraocular pressure. It measures the resistance of the cornea to pressure.
Many different methods are used to measure intraocular pressure. Some of these methods are electronic indentation, rebound, pneuma tonometry, applanation, etc. Many devices are designed that work on one of these methods. One such device is the Care ic 100, which is the best icare tonometer ?
icare ic100 tonometer is a product for every eye care professional designed on a new measuring principle. The device does not require specialized skills to use it. Its new design and good user interface are going to make a new level in IOP measuring. It is the latest member of the family of the tonometer. Its predecessors are Icare TA01i and ic100. It has received CE certification and worked on rebound technology. The best icare tonometer makes contact with the cornea momentarily to measure the pressure inside the eye.
It measures or evaluates contact time, various motion parameters, and deceleration when it comes in contact with the cornea. The state-of-art software is coupled with the device to evaluate the measurements.
Parts of tonometer:
- Probe base
- Collar’
- Forehead support
- Measure button
- Select button
- Navigation button
- A forehead support adjusting wheel display
The key features of Icare ic100 are:
AMS- it has automatic measuring sequence series. The device runs in single mode and can be operated with a single button.
Easy navigation: it uses an advanced navigation interface
Easy pose: it has an intelligent positioning assistant.
Icare 100 works on rebound technology.
About technology
The technology runs on the rebound measuring principle. The best icare tonometer has a lightweight probe that is used to measure the parameters. A coil system measures the motion parameters, which is an induction-based system. The software is used to analyze the parameters. The software runs on an advanced algorithm. Parameters like contact time and deceleration change with the IOP. For example, the contact time will be short if IOP is high and the probe decelerates fast.
Since ic 100 uses this technology thus, it requires less maintenance, regular service, or calibration. However, the probe base should be replaced annually and cleaned every six months. Cleaning the probe base is easy and can be easily understood from the user manual.
Icare ic 100 Description
The device is portable and handheld. No need to use local anesthesia before using care is ic100. It has adjustable forehead support, a container, and a spare probe base. The probes offered by it are disposable and can be used for a single patient. Change the examination for another patient. Additional accessories are also supplied with it. Accessories include a USB cable, a memory stick, and software.
The software records the data of a patient and can display the same on the computer screen. Data can be easily transferred, analyzed, and recorded from the device to the computer to view the patient’s report. The approximate dimension of ic 100 is 215x95x29 mm. Its approx weight is 230 g, including the weight of batteries. It has a 128×128 pixel OLED display. It can store data over 1000 readings.
It can measure accurate readings of the patients in two different positions: standing or sitting. If a device’s function is incorrect, it shows a red light on the probe, whereas, in the correct position, a green light is established—no need to select manually when used with either the left eye or right eye. A probe base has a wire pin. The tonometer runs on four non-rechargeable AA batteries.
icare ic100 tonometer patented rebound technology is a reliable technique for obtaining accurate and rapid IOP measurements from all your patients. Measuring requires no anesthesia, drops, air puffs or other preparation.
The easy to use icare ic100 incorporates guiding features and an intuitive user interface to maximize efficiency in clinical routines. No specialized skills are needed, just load, align and measure. Accurate and professional’s choice.
Key Features Icare ic 100 :
- Icare AMS:
- Automatic measuring sequence:
- series and single mode with one button
- Icare EasyNav:
- Advanced navigation interface
- Icare EasyPos:
- Intelligent positioning assistant for the correct alignment of the tonometer
Package includes:
- Icare ic100 Tonometer
- 4 x AA batteries
- 100 single use probes in a box
- Aluminum case
- IOP pad
- Probe base cleaning container
- Probe base plug
- Quick guide
- Screw driver
- Silicone grip
- Spare probe base
- USB memory stick including instruction manuals
- Warranty card
- Wrist strap
EASY TO USE
- Suitable for all patients
- No calibration needed
- Device confirms alignment
COMFORTABLE FORTHE PATIENT
- Reduces anxiety
- Improves compliance
- Takes only a few seconds
- No anesthesia or fluorescent dye
- No unpleasant air puffs
- Measurement barely noticeable
How to use it?
Switch on the device using the main button. A patient should be positioned appropriately, either in a standing or sitting position. Ask the person to look straight and bring the tonometer closer to the eye. Place the probe perpendicular. Place the probe tip at a distance of 4-8 mm from the cornea. Ensure the position of a probe by adjusting the wheel that will move the forehead support.
The measurement is based on six readings taken individually. To take the individual IOP measurement, press the button. ic100 tonometer has series mode means it can take all six readings by pressing the button only once. The button should be pressed down, and it will automatically take the measurements. The final result of the measures is the average reading, and high and low readings are discarded. A beep sound is released after each analysis. During the process, the probe moves toward the cornea and comes back to its original position. Results are then displayed on the screen.
[irp posts=”4420″ ]
Where can it be used?
In all healthcare settings, whether it is primary, secondary, or tertiary,
best icare tonometer like ic100 tonometers can be used by ophthalmologists. No additional skills are required to use the device; however, a user manual is offered with the product to guide the user about its use.
It is intended for the screening of glaucoma and in the diagnosis process. A single probe is used for the measurements, so it can be used without the fear of contamination. The part of the tonometer is not made with latex. It can be used on those experiencing symptoms like tunnel vision, blurred vision, severe eye pain, reddening of an eye, halos around lights, and loss of peripheral vision. These symptoms are signs of glaucoma.
Conclusion
The person had a family history of those suffering from glaucoma, diabetes, hypothyroidism, and other chronic eye conditions and needed a tonometry test. In addition, those having near sight or who have been using corticosteroid medications for a long also need it.
The situation is most common in elderly people, and thus ic 100 tonometer was an essential and best icare tonometer in 2023. Since it is CE-marked, therefore can be used without any doubts.